150mm (6″) ID Pumice Liner Pack
The 150mm pack is the 6 inch stove kit. It suits an appliance outlet of 125mm or 150mm.
Which 150mm liner pack height do I need?
In the pack: rebated pumice liners, support block, 150mm stainless adaptor, lip glue, LECA for the minimum void, and a chimney notice plate. A wider void needs more LECA. Bends are separate.
The 150mm (6 inch) pack is put together by Isokernshop from genuine Schiedel Isokern components. Every height includes the stove connection: a 150mm liner support block, a support plate for 150mm and a 150mm stainless steel adaptor, plus a chimney notice plate. If the appliance outlet is 125mm, a 125mm to 150mm adaptor can be chosen on the product page.
150mm packs compared by height
| Chimney height | 150mm liners (600mm) | LECA 50L bags | Lip glue 5kg bags | Shop |
|---|---|---|---|---|
| 4.8m | 8 | 3 | 1 | 150mm 4.8m pack |
| 5.4m | 9 | 3 | 1 | 150mm 5.4m pack |
| 6.0m | 10 | 4 | 1 | 150mm 6.0m pack |
| 6.6m | 11 | 4 | 1 | 150mm 6.6m pack |
| 7.2m | 12 | 4 | 1 | 150mm 7.2m pack |
| 7.8m | 13 | 4 | 2 | 150mm 7.8m pack |
| 8.4m | 14 | 5 | 2 | 150mm 8.4m pack |
| 9.0m | 15 | 6 | 2 | 150mm 9.0m pack |
The LECA allowance covers the minimum void (the 4.8m pack is based on an internal chimney void of 235mm x 235mm). A larger void needs more LECA, so use the liner calculator.
About the 150mm liner
Each Isokern 150mm liner has a 200mm outside diameter, is 600mm long and weighs about 8kg (Isokern price list). It is certified by Schiedel to EN 1857 (T600 N2 D 3 G) and suits all fuel types but not condensing appliances. Liners are installed socket uppermost with lip glue joints about 2mm thick, inside at least 100mm of masonry and with a minimum 15mm of LECA, mixed 20:1 with OPC cement, around them.
Choosing the height
Packs rise in 0.6m steps, one 600mm liner at a time. Choose the pack nearest your chimney height and add single 150mm liners if you need a little more. Remember the chimney must terminate at the correct height under Approved Document J.
Bends and extras
Bends are not in the pack. Schiedel allows up to two offsets (four bends) at no more than 45° from vertical, supported and backfilled with the LECA mix. Choose from the 15°, 30° and 45° 150mm bends, and use a steel collar with lip glue on any cut joint. A chimney pot or rain cap finishes the stack. Extra lip glue and LECA are sold singly.
See all pumice liner packs, or read how Isokern pumice flue liners work.
150mm liner pack FAQs
What is included in the 150mm pack?
Rebated 150mm pumice liners, a liner support block, a support plate, a 150mm stainless steel adaptor, lip glue, LECA for the minimum void and a chimney notice plate. Quantities by height are in the table above.
Will it suit a stove with a 125mm outlet?
Yes. A 125mm to 150mm adaptor can be chosen on the product page.
Are bends included?
No. Bends, collars and chimney pots are ordered separately.
Can I use this pack to reline an existing chimney?
Schiedel states pumice liners are suitable for relining existing masonry chimneys, provided there is at least 100mm of masonry around the liners and a minimum 15mm of LECA in between.
Need help choosing your 150mm liner pack?
Speak to our Isokern team on 0113 322 5187 or email [email protected]. We can check sizes, flue requirements and what to order.
Isokern is made by Schiedel; we are not the manufacturer.


Pallet










