Shopping basket

Sub total

£0.00

(You’ll pick your shipping method in the next step)

Proceed To Checkout

or Continue Shopping

Close Menu

Mon-Fri 9am - 4pm
[email protected]

FREE DELIVERY ON ORDERS OVER £500

PalletPallet£0.000

Gathers

A gather is the throat between an open-fire chamber and the flue. Pumice, Manor and concrete gathers are listed here.

Which gather do I need?

A gather sits on top of an open-fire chamber and funnels the opening into the flue. Match the gather to the chamber, then the flue to the gather. A stove normally starts on a support block and adaptor, not a gather. Choose your gather type:

Manor gathers

350mm flue; internal width 933mm or 1191mm; centre or offset hole.For the larger open-fire chambers, 900mm to 1150mm, where a standard pumice gather is too small.

View

Pumice gathers

225mm liner or 200mm DM44 outlet; internal width 690mm.For open-fire chambers up to 690mm, built onto a liner system or a DM44 chimney.

View

Concrete gathers

C16 200/225mm, C17 250mm, C18 300mm; internal width 600mm or 800mm.For new builds and renovations where a pumice gather is not the right fit; can be widened with extra lintels.

View

Size the flue for the fire opening with our flue size calculator.

Gather dimensions and weights

GatherFlue (ID)Internal widthExternal W × H × DWeightShop
Manor 900 Centre Hole350mm933mm1086 × 525 × 640mm140kgView
Manor 900 Offset Hole350mm933mm1086 × 525 × 640mm140kgView
Manor 1150 Centre Hole350mm1191mm1350 × 930 × 640mm268kgView
Manor 1150 Offset Hole350mm1191mm1350 × 930 × 640mm268kgView
Pumice gather for liners225mm690mm850 × 600 × 450mm100kgView
Pumice gather DM44200mm690mm850 × 600 × 450mm100kgView
Concrete C16200/225mm600mm800 × 225 × 450mm110kgView
Concrete C17250mm800mm1000 × 300 × 550mm130kgView
Concrete C18300mm800mm1000 × 300 × 550mm138kgView

Figures from the Schiedel Isokern Chimney Systems brochure.

How to choose the right gather

  • Chamber width: the gather's internal width must suit the fire chamber below it. Pumice gathers suit chambers up to 690mm; Manor gathers cover 900mm to 1150mm.
  • Flue system above: the DM44 pumice gather has a 200mm outlet for a DM44 chimney; the liner gather takes 225mm pumice flue liners; Manor gathers have a 350mm outlet for 350mm liners or DM54.
  • Centre or offset: Manor gathers come with a centre or offset hole. Keep any offset in the flue above gentle.
  • Flue size: the flue above still has to meet the Approved Document J cross-section for the fire opening. Schiedel gives a minimum flue height of 4.5m from the top of the fire opening.
  • Firechest kits: a Magnum firechest or Standard firechest pairs with its own gather elements, so check the kit before ordering a gather separately.

How a gather is installed

In outline, from the Schiedel Isokern Chimney Systems brochure:

  1. Build the fire chamber on a suitable constructional hearth, with 100mm of brick or blockwork around the sides and back as the Building Regulations require.
  2. Bed the gather on the chamber or lintels and fix it with lip glue, making sure all the elements are level.
  3. Fit lintels above the gather where needed to carry the brick or blockwork. The maximum loading capacity of the Isokern firechest and gather is 2500kg.
  4. Build the flue liners or DM chimney up from the gather outlet.
  5. Finish the front face of the gather with plasterboard, render, or clad it in masonry.

Test and check the chimney under Approved Document J before use.

Technical downloads

Fireplace gather FAQs

What is a fireplace gather?

A gather is the throat between an open-fire chamber and the flue. It sits on the chamber or lintels and funnels the fire opening into the flue above.

Do I need a gather for a wood burning stove?

Normally not. A stove install usually starts on a support block and stainless steel adaptor rather than a gather.

Which gather suits a DM44 chimney?

The Isokern DM44 pumice gather has a 200mm outlet and a 690mm internal width, made to suit a DM44 chimney.

What gather do I need for a wide open fire?

Manor gathers cover the larger chambers, with internal widths of 933mm (900 series) and 1191mm (1150 series), and a 350mm flue outlet.

What is the difference between a centre hole and an offset hole Manor gather?

The flue outlet position. A centre hole gather takes the flue straight up from the middle; an offset hole gather sets it to one side.

Pumice or concrete gather?

Pumice gathers suit chambers up to 690mm on a liner or DM44 system. Concrete gathers (C16, C17, C18) cover 200mm to 300mm flues with internal widths of 600mm or 800mm, and can be widened with extra lintels.

How much weight can a gather carry?

Schiedel gives a maximum loading capacity of 2500kg for the Isokern firechest and gather. Lintels may be required above the gather to carry the brick or blockwork.

How is a gather fixed?

With Isokern lip glue, with all the elements level. The front face can then be finished with plasterboard, render or masonry cladding.

Need help choosing your fireplace gather?

Speak to our Isokern team on 0113 322 5187 or email [email protected]. Send us the fire chamber width and the flue you plan to use, and we will match the gather.

Isokern is made by Schiedel; we are not the manufacturer.