Accessories
Accessories for Isokern pumice chimneys: lip glue, LECA, adaptors, gathers, firebricks, pots and cowls, plus outdoor kitchens.
Which accessory section do I need?
The parts here finish and connect an Isokern pumice liner or Double Module (DM) chimney. Start with the section that matches the job:
Pumice accessories
Lip glue, LECA, collars, support plates, render.The consumables and fixings used on every pumice chimney build.
ViewIsokern adaptors
Stainless adaptors, 125mm to 300mm.Join the appliance flue pipe to a liner or DM support block.
ViewFirebricks and firebacks
Buff firebricks and clay firebacks.Linings for open-fire chambers and firechests.
ViewChimney pots and cowls
Pots, cowls and terminals.The top of the stack, above the last liner or DM block.
ViewOutdoor kitchens
Kingham and Hale kits.A pumice garden fireplace with granite tops and redwood storage.
ViewWork out bag quantities with the LECA and lip glue calculator.
What every pumice chimney needs
- Lip glue: seals the rebated joints of pumice liners, DM flue blocks and casings. One 5kg bag seals about 16 joints on a 150mm liner.
- LECA: light expanded clay aggregate, sold in 50 litre bags, for the minimum 15mm insulating surround in the masonry void around a pumice liner.
- Chimney notice plate: the identification plate for a completed chimney installation under the Building Regulations.
- An adaptor: one stainless adaptor to connect the appliance to the support block, sized to the appliance outlet and the flue.
Technical downloads
Isokern accessories FAQs
Do I need lip glue on every joint?
Yes. Isokern lip glue seals the rebated joints of pumice liners, DM flue blocks and casings.
How much lip glue and LECA do I need?
It depends on the flue size and height. One 5kg bag of lip glue seals about 16 joints on a 150mm liner. Use the LECA and lip glue calculator for your build.
Which adaptor fits my stove?
Match the adaptor to the appliance outlet and to the support block it sits on. Increaser adaptors step up from a smaller outlet, for example 125mm to 150mm.
Is a notice plate required?
A chimney notice plate is required for a completed chimney installation under the Building Regulations.
Need help choosing your Isokern accessories?
Speak to our Isokern team on 0113 322 5187 or email [email protected]. We can check sizes, flue requirements and what to order.
Isokern is made by Schiedel; we are not the manufacturer.


Pallet






































