Shopping basket

Sub total

£0.00

(You’ll pick your shipping method in the next step)

Proceed To Checkout

or Continue Shopping

Close Menu
Close Filters

Filters

  • Flue diameter
  • System
  • Model
  • Product type
  • Material
  • DM size
  • Pot height
  • Pot colour
  • Adapter type

Mon-Fri 9am - 4pm
[email protected]

FREE DELIVERY ON ORDERS OVER £500

PalletPallet£0.000

Pumice Liner Packs

A pumice liner pack is the straightforward way to order a standard chimney height. Packs run from 150mm to 350mm internal diameter.

85  Products


Which pumice liner pack do I need?

Each pack is put together by Isokernshop from genuine Schiedel Isokern components, so a standard chimney can be ordered in one go. Packs come in seven internal diameters from 150mm to 350mm and eight chimney heights from 4.8m to 9.0m. Heights rise in 0.6m steps because each liner in these sizes is 600mm long, so a 4.8m pack has eight liners and a 9.0m pack has fifteen. Choose your internal diameter:

150mm (6″) liner packs

150mm ID, 4.8m to 9.0m in 0.6m steps, with stove connection.Suits stove with a 125mm or 150mm outlet; includes the stove connection (support block, support plate and stainless adaptor).

View

175mm (7″) liner packs

175mm ID, 4.8m to 9.0m in 0.6m steps, with stove connection.Suits most freestanding stoves and small Class 1 gas fires with an outlet up to 175mm; includes the stove connection.

View

200mm (8″) liner packs

200mm ID, 4.8m to 9.0m in 0.6m steps.Suits a large stove or small open fire; connection parts are ordered separately.

View

225mm (9″) liner packs

225mm ID, 4.8m to 9.0m in 0.6m steps.Suits open fires; close to the old brick flue size.

View

250mm (10″) liner packs

250mm ID, 4.8m to 9.0m in 0.6m steps.Suits a medium open fire, or a stove with an unusually large outlet.

View

300mm (12″) liner packs

300mm ID, 4.8m to 9.0m in 0.6m steps.Suits a medium to large open fire or a double-sided fire.

View

350mm (14″) liner packs

350mm ID, 4.8m to 9.0m in 0.6m steps.Suits a large open fire; the flue size for the Magnum 950, 1100 and 1200.

View

Every pack includes rebated pumice liners, lip glue, LECA for the minimum void and a chimney notice plate.

Liner packs compared

Pack sizeNominal sizeHeightsStove connection in the packShop
150mm6″4.8m to 9.0mYes: support block, support plate and stainless adaptor150mm packs
175mm7″4.8m to 9.0mYes: support block, support plate and stainless adaptor175mm packs
200mm8″4.8m to 9.0mNo: order connection parts separately200mm packs
225mm9″4.8m to 9.0mNo: order connection parts separately225mm packs
250mm10″4.8m to 9.0mNo: order connection parts separately250mm packs
300mm12″4.8m to 9.0mNo: order connection parts separately300mm packs
350mm14″4.8m to 9.0mNo: order connection parts separately350mm packs

From 200mm upwards you are normally building for an open fire, so the support block, adaptor or gather is chosen separately to suit the job. Outside diameters and weights by size are on the pumice flue liners page.

Choosing the right pack

  • Size: the flue size is set by your appliance. Follow the stove or fire manufacturer's instructions and Approved Document J. For open fires, check the size with our flue size calculator.
  • Height: choose the pack nearest your chimney height, and add single pumice flue liners if you need extra length. Schiedel recommends a minimum flue height of 4.5m above the fireplace opening or the top of the appliance; shorter flues need a draught calculation to EN 13384-1.
  • LECA: Schiedel requires at least 15mm of LECA between the liners and the masonry. The pack allowance covers the minimum void (the 150mm 4.8m pack, for example, is based on an internal void of 235mm x 235mm). A wider void needs more bags, so check with our liner calculator.
  • Masonry: the liners must be surrounded by at least 100mm of brick, block or stone.
  • Route: if the chimney is not straight, add bends. Schiedel allows up to two offsets (four bends) at no more than 45° from vertical.

What is not in a pack

Bends, tees, steel collars, chimney pots and rain caps are sold separately, as are extra liners, lip glue and LECA for a larger void or a taller chimney. Any cut joint needs a steel collar as well as lip glue.

The liners in every pack are Isokern rebated pumice liners, certified by Schiedel to EN 1857 (T600 N2 D 3 G). They suit all fuel types but not condensing appliances, and can be used for new-build chimneys or to reline an existing masonry chimney.

How pumice flue liners are installed

In outline, from the Schiedel Pumice Liner installation guide:

  1. Install the liners socket uppermost and seal every joint with Isokern lip glue, applied in 12–15mm beads with the supplied bag. Finished joints should be 2–3mm thick; remove any excess so the flue stays smooth.
  2. Clad the liners with a minimum of 100mm brickwork or medium density (7kN) blockwork.
  3. Fill the gap around the liners with at least 15mm of LECA, mixed 20 parts to 1 part OPC cement with a small amount of water.
  4. Where an offset is needed, cut liners between bends as required. Any cut joint needs a steel collar as well as lip glue.
  5. Test and check the chimney in accordance with Document J, then complete the chimney notice plate and fix it permanently in the dwelling, ideally near the electricity consumer unit.
  6. Leave the chimney for at least 72 hours before use, then light only small fires for the first week.

Connection to an appliance that is connected to a gas or oil supply must be made by a Gas Safe or OFTEC registered installer, and Schiedel recommends HETAS registered installers for solid fuel. Outside England and Wales, the equivalent rules are Technical Booklet L in Northern Ireland and Section 3 of the Technical Handbook in Scotland. Read how Isokern pumice flue liners work for more detail.

Technical downloads

Pumice liner pack FAQs

What is in an Isokern liner pack?

Rebated pumice liners for the chosen height, lip glue, LECA for the minimum void and a chimney notice plate. The 150mm and 175mm packs also include the stove connection.

Which liner packs include the stove connection?

The 150mm and 175mm packs include a liner support block, a support plate and a stainless steel adaptor. Packs from 200mm to 350mm do not; the connection is chosen separately.

How many liners are in a pack?

Each liner in these sizes is 600mm long, so a 4.8m pack has eight liners and a 9.0m pack has fifteen, rising in 0.6m steps.

My chimney is taller than 9.0m. What should I order?

Choose the 9.0m pack and add single 600mm liners of the same internal diameter, with extra lip glue and LECA as needed.

Do I need extra LECA?

The pack covers the minimum void. If the gap between the liners and the masonry is larger, you will need more LECA; the liner calculator works it out.

Is a chimney notice plate included?

Yes. Every pack includes a chimney notice plate, which should be completed and fixed permanently in the dwelling after the chimney has been tested and checked.

Can a liner pack be used to reline an existing chimney?

Yes. Isokern pumice liners suit new-build chimneys and the relining of existing masonry chimneys, surrounded by at least 100mm of masonry with LECA between. They are not suitable for condensing appliances.

Who makes the liner packs?

The packs are put together by Isokernshop from genuine Schiedel Isokern components. Isokern liners are made by Schiedel.

Need help choosing your pumice liner pack?

Speak to our Isokern team on 0113 322 5187 or email [email protected]. Tell us the appliance, the chimney height and the void around the liners, and we will confirm the right pack and any extras.

Isokern is made by Schiedel; we are not the manufacturer.