DM36 Chimney Packs
A DM36 pack is a standard height of 150mm pumice chimney: flue blocks, casings and the usual starter parts.
Which DM36 chimney pack do I need?
Check the stack height and any offset on the DM calculator before you order. Offsets, cappings and adaptors that are not in the pack are on the DM36 category.
Packs are listed by internal diameter and stack height. Choose the flue size first, then the height:
DM36 150mm pack, from 4.5m
150mm ID; 4.5m to 9.0m.8 heights; see the table below for every height.
ViewParts that are not in a pack are on the DM36 category. Compare all systems on Double Module.
DM36 chimney packs by height
| Internal diameter | Stack height | Shop |
|---|---|---|
| 150mm | 4.5m | DM36 150mm 4.5m pack |
| 150mm | 5.0m | DM36 150mm 5.0m pack |
| 150mm | 5.5m | DM36 150mm 5.5m pack |
| 150mm | 6.0m | DM36 150mm 6.0m pack |
| 150mm | 6.5m | DM36 150mm 6.5m pack |
| 150mm | 7.0m | DM36 150mm 7.0m pack |
| 150mm | 8.0m | DM36 150mm 8.0m pack |
| 150mm | 9.0m | DM36 150mm 9.0m pack |
Technical downloads
DM36 chimney pack FAQs
What heights do DM36 chimney packs come in?
This category lists DM36 packs from 4.5m to 9.0m. Check your stack height on the DM calculator before you order.
Is everything for the chimney in the pack?
A pack covers a standard height. Offsets, cappings and adaptors that are not in the pack are listed on the DM36 category.
Can I mix DM casings between sizes?
No. Do not mix DM36, DM44 and DM54 casings.
Need help choosing your DM36 chimney pack?
Speak to our Isokern team on 0113 322 5187 or email [email protected]. We can check sizes, flue requirements and what to order.
Isokern is made by Schiedel; we are not the manufacturer.


Pallet








