Shopping basket

Sub total

£0.00

(You’ll pick your shipping method in the next step)

Proceed To Checkout

or Continue Shopping

Close Menu

Mon-Fri 9am - 4pm
[email protected]

FREE DELIVERY ON ORDERS OVER £500

PalletPallet£0.000

Building chimneys and fitting pumice liners in Northern Ireland

Video poster

Building chimneys and fitting pumice liners in Northern Ireland

If you are building a new chimney, relining an existing one, or fitting a stove in Northern Ireland, the rules that apply are Northern Ireland’s own building regulations. They are not the same as the rules in England.

This guide explains, in plain terms, which official documents apply, how to start a Building Control application, and how Isokern pumice liners and Double Module chimney systems can be ordered for delivery to BT postcodes. It is a starting point, not a design guide. Always follow the current official guidance and your district council’s advice.

Northern Ireland has its own building regulations

The current regulations are the Building Regulations (Northern Ireland) 2012, which came into operation on 31 October 2012. That is set out by the Department of Finance:

Building Regulations in Northern Ireland

The department also publishes Technical Booklets. These are guidance. The Department of Finance says that if you follow a Technical Booklet there is a presumption of compliance with the regulations it covers, but that this can be overturned, and that you may use another form of construction if you can show your district council that the regulations have been met.

Building Regulations Technical Booklets

Technical Booklet L, not Approved Document J

For combustion appliances and fuel storage systems — the part that covers chimneys, flues and appliances — the current official guidance in Northern Ireland is Technical Booklet L, “Combustion appliances and fuel storage systems”, dated October 2012. The Department of Finance says it provides guidance on regulations 70 to 76.

Technical Booklet L (Department of Finance)

This is the Northern Ireland equivalent topic to Approved Document J in England, but it is a different document, with a different name, and it sits under different regulations. Do not use an England-only Document J checklist as proof that an NI job complies.

We have a separate guide to Document J for work in England: Understanding Document J Building Regulations for Chimneys.

This post does not quote flue heights, separation distances or appliance rules from Technical Booklet L. Those details should be taken from the booklet itself, and from your designer or installer, because they depend on the appliance, the fuel and the building.

You apply to your district council

In Northern Ireland, district councils carry out Building Control. The Department of Finance says that if you intend to erect, alter or extend a building, to install services, fittings or works, or to materially change the use of a building, you must first seek approval from your district council. That may mean submitting plans, or, for certain domestic work, a building notice, with the appropriate fee.

Same source as above: Building Regulations in Northern Ireland

NI Direct also explains that you must tell the council in your area about building work you want to do, and that they inspect and approve work that meets their standards:

How to apply for Building Regulations approval (NI Direct)

If you are unsure whether a liner, a new chimney, a stove install or a flue alteration needs an application, ask your local Building Control department before work starts. Council pages vary, but many describe three routes: a full plans application, a building notice for smaller domestic work, and a regularisation application for work already done without approval. Your own council’s page is the one to follow.

Choosing an Isokern system

Isokern products are pumice chimney systems. In practice, NI customers usually look at one of these:

Pumice flue liners, for use inside a masonry chimney. Sizes run from 150mm to 600mm internal diameter. You can buy individual liners or a liner pack for a set height. A plain-English overview is here: How Isokern pumice flue liners work.

Double Module (DM) systems, a pumice chimney made of matching inner flue blocks and outer casings. DM36 is for a 150mm stove flue, DM44 for 180mm or 200mm, and DM54 for larger flues. Do not mix sizes. Check the height and any offsets on the DM calculator before you order.

Magnum firechests and garden fireplaces are also available, if the job is an open fire or an outdoor fireplace: Magnum firechests, garden fireplaces.

Installation manuals and brochures are on the manuals and guides page. Always use the manual for the system you are fitting.

Delivery to Northern Ireland

Isokern Shop delivers to all BT postcodes, for both trade and home customers. Please allow 5 to 7 working days from when we accept your order.

Delivery charges are shown at checkout. UK VAT is charged as normal on Northern Ireland orders. There is a dedicated page with the full details: Isokern pumice chimney systems delivered to Northern Ireland, and on our delivery information page.

Next steps

  1. Confirm the appliance, fuel and flue size with your installer.
  2. Read Technical Booklet L and talk to your district council’s Building Control department about the application you need.
  3. Use the DM calculator or the liner pack heights if you are ordering a pack, and download the relevant manual.
  4. Order for your BT postcode, allowing 5 to 7 working days.

If you need help matching a pack to a height or a stove size, contact us.